View my LP6 GT Racing Simulator at home in augmented reality

Augmented reality

See your LP6 GT Racing Simulator at home

Scan this QR code with your phone to view the simulator at full size in your room.

QR code for the LP6 GT Racing Simulator augmented reality view
Open this page on a compatible iPhone or Android device, then tap the AR preview.

LPSIMU LP6 GT Racing Simulator

The LPSIMU LP6 GT is a complete GT racing simulator assembled, configured and tested in our workshop. It brings together the LPSIMU 4 chassis, Recaro Pole Position seat, three 52-inch LG displays, a Simucube 3 Pro Direct Drive wheelbase, a Bavarian Delta Pro SC wheel and Simucube ActivePedal Pro with Co-Pedal.

A wide view of the circuit

Three 52-inch LG displays extend the view on both sides. LPSIMU sets their angles around the driving position so you can follow nearby cars, braking markers and corner exits.

Feel the car through wheel, brake and harness

The Simucube 3 Pro drives the Bavarian Delta Pro SC wheel. ActivePedal Pro lets you tune brake travel and resistance, from initial pressure through release towards the apex. The Qubic QS-BT1 varies tension in the six-point Sabelt harness.

Complete and workshop prepared

The PC includes an AMD Ryzen 7 9800X3D, GeForce RTX 5090, 64 GB of DDR5 memory and a 2 TB Gen4 NVMe SSD. Stream Deck+, wireless Logitech G PRO X headset, Logitech Z906 5.1 speakers and a K400 keyboard complete the setup. Assetto Corsa 1 and SimHub are included.

Delivery and on-site installation are available by quotation. Contact LPSIMU to configure your simulator with our team.

Chassis

  • LPSIMU 4 chassis
  • Stainless steel seat rails and slides

Seat

  • Recaro Pole Position

Wheel and wheelbase

  • Simucube 3 Pro Direct Drive, 25 N·m peak torque
  • Simucube Link Hub
  • Bavarian Delta Pro SC

Pedals

  • Simucube ActivePedal Pro and Co-Pedal
  • LPSIMU footrest

Displays

  • Triple 52-inch LG display pack

PC

  • AMD Ryzen 7 9800X3D
  • NVIDIA GeForce RTX 5090
  • 64 GB DDR5 6000 RGB (2 × 32 GB)
  • 2 TB Gen4 NVMe SSD
  • High-performance liquid cooling
  • White NZXT H9 case

Physical feedback

  • Qubic System QS-BT1 belt tensioner
  • Qubic backplate without carbon
  • Six-point Sabelt harness

Accessories

  • Elgato Stream Deck+ and SMALLRIG Magic Arm
  • Wireless Logitech G PRO X headset and LPSIMU holder
  • Logitech Z906 5.1
  • Logitech K400 keyboard and LPSIMU tray
  • Creative BlasterX AE-5 Plus
  • SimHub licence
  • Six-socket power strip
  • Five cable supports
  • Seven-port USB hub
  • Qubic cable sleeve
  • Ethernet switch and cable
  • Simucube Link splitter

Software

  • Assetto Corsa 1

Workshop assembly and testing

LPSIMU assembles, configures and tests your simulator before delivery. Controls, software and the complete installation are checked together.

Delivery and installation

Delivery and on-site installation in France and across Europe are available by quotation. The agreed service covers positioning, connections and startup.

Handover and support

A walkthrough accompanies installation. Two hours of technical support after delivery help you use the simulator and refine its settings.

Warranty and follow-up

Two-year LPSIMU warranty under the applicable terms. Manufacturer warranties remain subject to their own terms.

Lead time and contact

Lead time is confirmed when ordering, depending on personalization and component availability. Contact us at contact@lpsimu.fr.

€35.500,00
Tax included
Order my LP6 GT

Price excludes delivery and installation. Delivery and installation by LPSIMU technicians are available by quotation throughout Europe.

A CLOSER LOOK AT LP6 GT

The circuit all around you.

Side view of the LPSIMU 4 chassis and Recaro seat on the LP6 GT

01 / THE CHASSIS

A driving position built around you.

The LPSIMU 4 chassis supports the Recaro Pole Position seat, pedals and triple 52-inch LG displays. Stainless steel seat rails and slides help set your distance to the wheel and pedals.

LPSIMU prepares the driving position with the controls and screens in our workshop.

Bavarian Delta Pro SC wheel and Simucube 3 Pro wheelbase on the LP6 GT

02 / FORCE FEEDBACK AND WHEEL

Force feedback at the heart of the drive.

The Simucube 3 Pro Direct Drive wheelbase delivers up to 25 N·m of peak torque. The Bavarian Delta Pro SC wheel conveys changes in vehicle load and grip as you turn in.

Force feedback strength is tuned to your preferences. The Simucube Link Hub connects the cockpit devices.

Simucube ActivePedal Pro and Co-Pedal on the LP6 GT

03 / THE PEDALS

An active brake you can feel underfoot.

Simucube ActivePedal Pro, Co-Pedal and the LPSIMU footrest let you tune brake travel, resistance and the force curve.

You feel pressure build, ABS feedback and the progressive release of the brake towards the apex. Those physical cues help make braking more natural and repeatable.

Driver view of the LP6 GT triple 52-inch LG displays

04 / DISPLAYS AND PC

Three 52-inch displays to read the race.

Three 52-inch LG displays surround the driver and extend the image to either side. They help you place nearby cars, follow the apex and anticipate corner exit. Their angles are set around the driving position.

The PC combines an AMD Ryzen 7 9800X3D, GeForce RTX 5090, 64 GB of DDR5 and a 2 TB Gen4 NVMe SSD. Actual smoothness depends on the simulation and graphics settings.

Recaro Pole Position seat on the LP6 GT

05 / SEAT AND EQUIPMENT

A complete cockpit, down to the details.

The Recaro Pole Position seat, Bavarian wheel and Simucube pedals form a driving position prepared as a whole. A wireless Logitech G PRO X headset, Logitech Z906 5.1 speakers and a K400 keyboard complete the setup.

LPSIMU assembles, cables, tunes and checks the simulator in our workshop before delivery.

Stream Deck+ and cockpit controls on the LP6 GT

06 / COCKPIT CONTROLS

Your controls within easy reach.

The Stream Deck+ on its SMALLRIG mount puts useful controls beside the wheel. LPSIMU arranges launch, setup and support shortcuts around your use.

A Creative BlasterX AE-5 Plus sound card accompanies the included Logitech Z906 5.1 speaker system.

Qubic QS-BT1 belt tensioner and Sabelt harness on the LP6 GT

07 / BELT TENSIONER

The harness responds to every braking input.

The Qubic System QS-BT1 varies tension in the six-point Sabelt harness. Under braking the belts tighten to give the driver a physical cue; changes in tension also follow acceleration and load transfer.

LPSIMU tunes the system alongside the wheel and pedals.

Mains power socket and RJ45 Ethernet port connected

08 / SIMPLE CONNECTIONS

One plug. Ready to drive.

Our cable management brings power for the cockpit, PC and peripherals together on a single 220–230 V socket, whatever setup you choose.

For online racing, we recommend an RJ45 Ethernet connection for a stable network link.

Race car taking a corner on a circuit

09 / READY-TO-RACE SOFTWARE

Assetto Corsa, ready for your first laps.

We install and configure the original Assetto Corsa in our workshop. A broad selection of cars and French circuits is ready on the simulator, so you can get on track from your first session.

Other racing simulations are available as an option.

Matteo from LPSIMU providing remote simulator support

10 / SUPPORT AND UPGRADES

Support that follows your driving.

After setup, our monthly plans may cover updates, new cars and tracks, wheel and pedal settings, remote support and, depending on the plan, upgrades and visits. Contact LPSIMU to choose the right level of support for your use.

Complete LPSIMU GT simulator ready for installation

11 / TURNKEY INSTALLATION

Installed, configured, ready to drive.

By quotation, LPSIMU technicians deliver the simulator to your home or premises, install the cockpit and connect all equipment. They configure the software and peripherals, check the settings, explain how the simulator works and guide your first laps with practical advice.

COST ESTIMATOR

Drive more. Spend less per lap.

Use your own figures to compare a day on track with the time you spend driving at home. The price of this simulator is included in the estimate.

Adjust time horizon and running costs

This simulator’s price—

ESTIMATED COST PER LAP

On a real track—per lap
On your simulator—estimated per lap
YOUR COMPARISON

—

Estimated difference per lap: —

Annual track budget—

Estimated simulator laps over the period—

Estimated track cost for the same number of laps—

View calculation details

How is the cost per lap calculated?

01Estimated simulator laps = hours per week × weeks per year × years of use × 60 ÷ average lap length in minutes.

02Simulator cost per lap = (simulator price + annual running costs × years of use) ÷ estimated simulator laps.

03Track cost per lap = full cost of a track day ÷ laps driven that day. Multiply this by the estimated simulator laps to see the cost of the same number of laps on track. Track days per year show the annual track budget.

—

Drive when it suits you

Fit in a quick session at home, without planning a full track day.

Repeat to refine your technique

Revisit the same corner, braking point and racing line as often as you need.

Make more of every track day

Work on your reference points between real-world outings, then put them to use on track.

Indicative calculation: simulator price and the annual running costs you enter, divided by estimated laps. Add electricity, subscriptions or maintenance to those costs if applicable. Track-day budgets vary; simulator practice complements real driving.

Would you like to configure your simulator from start to finish with our LPSIMU experts and create a personalised setup?

Contact us

GT driving, from the first lap to the stopwatch.

01

Read the circuit

On a circuit, every reference point matters. Refine your racing line, braking zones, grip management and consistency lap after lap. A stable driving position helps you repeat the same inputs at every corner.

02

Feel the car respond

Force feedback, pedals and the visual environment deliver the cues that matter in GT driving. Read load transfer, modulate braking and refine steering corrections as the pace increases.

03

From enjoyment to preparation

Enjoy your first laps, then refine your reference points ahead of a track day or race. Your simulator can evolve with your driving through settings and equipment planned with the LPSIMU team.

Delivery planned with you

Shipping across Europe by quotation. We confirm the arrangements with you before your order.

Turnkey installation

Delivery, installation and handover in your chosen room across Europe, by quotation.

Workshop preparation

We assemble, configure and test the cockpit, PC and peripherals in our workshop.

Handover and support

Two hours of technical support after delivery help you get started.

Warranty and follow-up

Two-year LPSIMU warranty under the applicable terms, plus follow-up support.